Sena-bluetooth SPH10 v4.2 User's Guide Bedienungsanleitung PDF herunterladen (Seite 17)

SPH10

The voice prompt for each menu item is as below:

(1) VOX phone (4) Delete all pairings

(2) VOX intercom (5) Exit conguration

(3) Voice prompt

VOX phone

Exit configuration VOX intercom

Delete all pairings Voice prompt

9.1 Enabling/Disabling Voice Activated

Phone Answering

Voice Prompt

“VOX phone”

Factory Default Enable

Enable Tap the Phone Button

Disable Tap the Jog Dial

If this feature is enabled, you can answer incoming

calls by simply saying a word loudly enough. For

example, when you hear a series of beeps for an

incoming call, you can answer the phone by saying

“Hello” or any other word loudly. This is enabled from

the factory but you can disable this. If this mode is

disabled, you have to tap the Jog Dial or the Phone

Button to answer an incoming call.

9.2 Enabling/Disabling Voice Activated

Intercom

Voice Prompt

“VOX intercom”

Factory Default Disable

Enable Tap the Phone Button

Disable Tap the Jog Dial

If this feature is enabled, you can initiate an intercom

conversation with the last connected intercom

friend by speaking any word loudly enough.The

most effortless way to trigger intercom VOX is to

blow into the microphone as if blowing dust off the

microphone. If you start an intercom conversation

by VOX, the intercom terminates automatically when

you and your intercom friend remain silent for 20

seconds. However, if you manually start an intercom

conversation by tapping the Jog Dial, you have to

terminate the intercom conversation manually.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 41 42

Keine Kommentare

Sena-bluetooth SPH10 v4.2 User's Guide Bedienungsanleitung Seite 17